OPTIMUM SOLUTION GROUP
710 Higgins Road
Suite 102
Park Ridge IL 60068
TEL 630-705-1002
FAX 630-705-1003
TOLL FREE 877-705-1002
E-mail:
[email protected]
Q-Implant
Back to the roots
- a gap free one piece titanium implant
- atraumatic one-phase concept
- immediate temporisation and immediate loading possibilities
- reduced treatment time for both patient and dentist
- easy to follow treatment sequence
- clearly arranged titanium instruments
THE Q-IMPLANT-CONCEPT
This low-cost implant system was developed
to cover many indications in implant
dentistry. Designed to provide simplicity
and clarity, we have created a system that
removes many of the disadvantages of
earlier implant systems. This single-phase
enossal implant is made of titanium and
there are no complex components.
Its self-cutting thread achieves a high
primary stability which allows the immediate
placement of a temporary crown.
The transgingival healing makes a second
operation unnecessary and the sand-blasted
surface reduces the time taken for
osseointegration. These features, together
with the mirror-finished implant head, aid
wound healing and reduce post-operative
infections.
THE IMPLANT HEAD
The top of the implant was designed with
a 7' cone. It can be individually grinded
and can therefore be treated like a natural
tooth. To avoid rotation, 4 symmetrical
axial slots were placed on top.
They also guide the wrench you use to
screw in the implant. This gives you the
possibility to supply the implant with a
temporal suprastructure. Before impression,
the slots should be blocked out with
composite. Using a dental dam, you may
even grind the top during or right after
surgery. Easy mucosa- and gum- management
is possible due to the mirror-finish.
Your patient leaves your office with an aesthetic and functional solution on the day of surgery.
THE THREAD
Q-Implants are constructed with a selfcutting
thread. Gentle bone-management
and atraumatical insertion is possible by
using minimal force.
Even in the spongious bone of the upper
jaw you reach a high primary stability.
To reach this goal, we attached maximum
importance in the development of a
progressive designed thread with axial
milling cuts, reducing stress and strain
effects.
This spreads jaw pressure equally to the
bone. The axial cuts also avoid rotation.
Bone shavings can be harvested and
re-used during osteogenisis.
THE SURFACE
For maximum osseointegration the surface
was etched and blasted with aluminiumoxide.
Q - Implant sugery steps
Using a TRINON scalpel, the mucosa is opened by a crestal cut. A fold of skin is then built to uncover the osseous structures. Alternatively a gum punch can be used.
Use a rotating drill to create an indentation on the surface of the bone. Alternatively use a trocar drill to punch the mucosa if flapless surgery technique is applied.
Considering both of optimal prosthetic and enossal position of the implant, the right direction of the pilot drill is chosen.
The shaping drill is performed with the selected diameter and length.
Taken from the sterile cover the implant is gently inserted into the prepared bone cavern with the insertion wrench. It may be helpful to use the handwheel or the handwrench. By its self-cutting design the implant gains maximum primary stability.
After reaching the implants final position, the mucosa is stitched up tightly. This is not necessary if a gum punch was used.
A temporal suprastructure is recommended during the healing phase by means of using a MultiCap+ or a Silicone Cap. The final prosthetic suprastructure follows.
Q - Implant sugery steps
The Q - Box
The Q-Box was designed for clarity and simplicity. It can be easily stacked into an autoclave and its sturdy construction ensures stability even following many sterilisation procedures. Every system component has its
own unmistakeable place making it easy for the operating assistant to locate the correct component quickly and effi- ciently. The titanium bowl can be used for blending bone augmentation material as well as the temporary storage of operatinginstruments.
Q-Tom
with the Q-Tom set the implantologist receives a bone-spreading and bonecondensing equipment completing the Q-Implant product range. These osteotomes made of titanium convince through their delicate design, maximum biocompatibility and elegant handling. The angulation of the convex working-ends support the use in frontal as well as in molar region. The Q-Tom set includes seven osteotomes beginning with a diameter of 1,8 mm.
The diameter rises by 0,2 mm per instrument to the maximum diameter of 3 mm. Through the minimal spreading of only 0,2 mm the operative effort and at the same time the risk of bone fractures in the spongious region is lowered. The excellent visibility of the lasermarking (length 8, 10, 12, and 14 mm) gives maximum safety for insertion depth.
In every case Q-Implants
The Q-Implant product range suits all indications.
Such as single tooth treatment and bridges, increasement of pillars in reduced set of
teeth and in edentulous jaws.
It might be loaded immediately after tooth extraction and serves perfectly for immediate
suprastructure, because of the high primary stability that is achieved by its very specific
thread design.
Q-Implant, the implant system of the present and future !
a popular and effective
one-phase concept
ideal for immediate temporisation
and immediate loading
Two different neck heights;
Standard (4 mm)
and Short (2 mm)
in diameter 3,5 ; 4,5 or 5,6 mm
and length 8, 10, 12 or 14 mm
available
an innovative one-phase concept
appropriate for strongly atrophied
but wide lower and upper jaw
ideal for immediate temporisation
and immediate loading
neck height 0,6 mm
in diameter 7,0 mm
and length 4, 5, 6, 7 mm available
one-phase implant with
ballpoint-head
excellent to be incorporated in
existing overdentures
or its implant supported
new creation
in diameter 3,5 mm and 4,5 mm
and length 8, 10, 12 oder 14 mm
available
two-phase implant with
inner cone
universal in use, fits all
indications
suitable for immediate and delayed
loading and temporisation
compatible to many
other systems
in diameter 4,0 mm
and length 8, 10, 12 oder 14 mm
available
two-phase implant with external
hexagon
universal in use, fits all
indications
suitable for immediate and delayed
loading and temporisation
compatible to many
other systems
in diameter 3,75 mm
and length 8, 10, 12 oder 14 mm
available
Surgery
QK-Prosthetics
Q2-Prosthetics
Para-Tubes suitable for all implant system
An intelligent solution for perfect parallelism.
A safe insertion is guaranteed with
the right distance and optimal axis.
Suitable for all implant systems.
Additional options
Trinon product range for medicine
- suitable for onlay-plastic and mesh supported augmentation
- bone screws in diameter 1,0 und 1,3 mm
- colour coding
- including titanium bowl for blending augmentation material or temporay storage of instruments
- 3-dimensional formed titanium mesh
- applicable to totally atrophied maxilla
- reduced operation time
- easy to use
- individual modulation
- modular, vertical titanium distractor
- pre-implantological augmentation of mandibula and maxilla
- innovative pin-basis-plate
- high stability
- minimally invasive surgery
- simplified treatment, reduced operation time
- titanium pins in length 3 mm and 5 mm
- for attachment of titanium mesh, -foils and membranes
- appropriate for 3-dimensional bone reconstruction
- titanium mesh 0,1 und 0,2 mm
- titanium foil 20 μ und 40 μ
- appropriate for maxillofacial-surgery
- titanium bonescrews and boneplates
- screw diameter 1,0 / 1,2 / 1,5 / 1,8 / 2,0 and 2,3 mm
- screwtop optional with inner crosshead or inner square
- large variety of plates with thickness 0,6 mm and 1,0 mm
- scalpel blades
- disposable scalpels
- external Ortho-Fixator made of titanium
- modular component system
- easy to use
- distraction, compression, dynamisation